No.6 TURN LIGHTS (EITHER SIDE) ILLUMINATED CONTINUOUSLY[TURN AND HAZARD WARNING LIGHTS]

id0902h1810800

Possible Cause

• Light switch malfunction

• Related wiring harness malfunction

Diagnostic Procedure

STEP

INSPECTION

ACTION

1

INSPECT LIGHT SWITCH

Disconnect the light switch connector.

Do the turn lights stop flashing?

Yes

Replace the light switch.

No

Go to the next step.

2

INSPECT RELATED WIRING HARNESS SHORT TO POWER SUPPLY

Measure the voltage at light switch terminal E and Q.

Is there voltage?

Yes

Repair the related wiring harness.

No

Replace the flasher control module.

STEP	INSPECTION		ACTION
1	INSPECT LIGHT SWITCH Disconnect the light switch connector. Do the turn lights stop flashing?	Yes	Replace the light switch.
1		No	Go to the next step.
2	INSPECT RELATED WIRING HARNESS SHORT TO POWER SUPPLY Measure the voltage at light switch terminal E and Q. Is there voltage?	Yes	Repair the related wiring harness.
2		No	Replace the flasher control module.