No.5 INTERIOR LIGHT CONTROL SYSTEM DOES NOT OPERATE USING TRANSMITTER[INTERIOR LIGHTS]

id0902h2813200

POSSIBLE CAUSE

• Malfunction in the transmitter

• Malfunction in the GEM

Diagnostic Procedure

STEP

INSPECTION

ACTION

1

INSPECT TRANSMITTER OPERATION

Turn the headlight switch to all the positions, then inspect the switch for normal operation.

Turn the headlight switch to the OFF position.

Using the transmitter, repeat locking and unlocking the door.

Does the door lock and unlock?

Yes

Go to the next step.

No

Refer to ON-BOARD DIAGNOSTIC [POWER DOOR LOCK SYSTEM].

2

INSPECT GEM OPERATION

Disconnect all the GEM connectors.

Inspect for the following items:

• Corrosion

• Terminal separation

Connect all the connectors and verify that their positions are correct.

Operate the system and inspect for any malfunction.

Is there any malfunction?

Yes

Replace the GEM.

Clear the DTC.

Repeat the GEM DTC inspection.

No

The malfunction may result from loose connectors or corrosion.

Clear the DTC.

Repeat the DTC inspection.

STEP	INSPECTION		ACTION
1	INSPECT TRANSMITTER OPERATION Turn the headlight switch to all the positions, then inspect the switch for normal operation. Turn the headlight switch to the OFF position. Using the transmitter, repeat locking and unlocking the door. Does the door lock and unlock?	Yes	Go to the next step.
1		No	Refer to ON-BOARD DIAGNOSTIC [POWER DOOR LOCK SYSTEM].
2	INSPECT GEM OPERATION Disconnect all the GEM connectors. Inspect for the following items: • Corrosion • Terminal separation Connect all the connectors and verify that their positions are correct. Operate the system and inspect for any malfunction. Is there any malfunction?	Yes	Replace the GEM. Clear the DTC. Repeat the GEM DTC inspection.
2		No	The malfunction may result from loose connectors or corrosion. Clear the DTC. Repeat the DTC inspection.