DTC INSPECTION[INSTRUMENT CLUSTER (L3)]
id0902h6800200
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
-
• When using the IDS (notebook PC)
-
1. Select the “Toolbox” tab.
2. Select “SelfTest”.
3. Select “Module”.
4. Select “IC”.
-
• When using the PDS (pocket PC)
-
1. Select “Module Tests”.
2. Select “IC”.
3. Select “SelfTest”.
3. Then, select the “Retrieve CMDTC” and perform procedures according to directions on the M-MDS screen.
Verify the DTC according to the directions on the M-MDS screen.
• If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
