No.1 IGNITION SWITCH DOES NOT OPERATE[POWER SUPPLY SYSTEM]

id0903g8820100

STEP

INSPECTION

ACTION

1

INSPECT IGNITION SWITCH POWER SUPPLY VOLTAGE

Turn the ignition switch off.

Disconnect the ignition switch connector.

Measure the voltage at ignition switch terminal D (harness-side).

Is the voltage 10 V or more?

Yes

Replace the ignition switch. (See IGNITION SWITCH REMOVAL/INSTALLATION.)

Inspect the system for normal operation.

No

Repair or replace the wiring harness.

Inspect the system for normal operation.

STEP	INSPECTION		ACTION
1	INSPECT IGNITION SWITCH POWER SUPPLY VOLTAGE Turn the ignition switch off. Disconnect the ignition switch connector. Measure the voltage at ignition switch terminal D (harness-side). Is the voltage 10 V or more?	Yes	Replace the ignition switch. (See IGNITION SWITCH REMOVAL/INSTALLATION.) Inspect the system for normal operation.
1		No	Repair or replace the wiring harness. Inspect the system for normal operation.