FRONT WINDOW REGULATOR REMOVAL/INSTALLATION

id091200804100

1.  Disconnect the negative battery cable.

2.  Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION)

3.  Remove the screw and the front door trim panel bracket.

atraaw00001952

4.  Position the door screen out of the way.

5.  Lower the front door glass to gain access to the screws.

6.  Remove the screws.

atraaw00001953

7.  Support the glass in the fully-closed position.

8.  Disconnect the power window motor connector.

atraaw00001954

9.  Remove the front window regulator as a single unit.

(1)  Remove the bolts.

(2)  Remove the nuts.

atraaw00001955

10.  Install in the reverse order of removal.

(1)  Operate the front door glass to verify correct window function.