FRONT SEAT REMOVAL/INSTALLATION

id091300800200

Warning

•  Handling the front seats improperly can accidentally deploy the side air bag, which may seriously injure you. Read air bag system service warnings and cautions before handling the front seats. (See SERVICE WARNINGS.)(See SERVICE CAUTIONS.)

Note

•  The driver’s seat is shown, the passenger’s seat is similar.

•  The power’s seat is shown, the manual seat is similar.

1.  Turn the ignition switch to the LOCK position.

2.  Disconnect the negative battery cable and wait for 1 min or more.

3.  Move the seat to the most forward position.

4.  Remove the covers.

atraaw00001664

5.  Remove the bolts, then remove the front seat.

6.  Move the seat to the most rearward position.

7.  Remove the bolts, then remove the front seat.

atraaw00001665

8.  Refer to the air bag system deactivation procedure and deactivate the system. (See AIR BAG SYSTEM DEACTIVATION PROCEDURES.)

9.  Disconnect the seat harness electrical connectors.

Note

•  Some component connectors may not exist due to vehicle options.

10.  Remove the front seat.

11.  Install in the reverse order of removal.