FRONT FOG LIGHT AIMING

id091800802200

1.  Set up a screen as shown in the figure below for aiming the headlights.

atraaw00002176

2.  Adjust the tire pressure to the specification.

3.  Position the unloaded vehicle on a flat, level surface.

4.  Seat one person in the driver’s seat.

5.  Position the vehicle straight ahead and perpendicular to the white screen and set the fog lights 3 m {0.98 ft} from the white screen.

atraaw00002177

6.  Place an object in front of the fog light not being adjusted to block its light beam.

7.  Start the engine and fully charge the battery.

8.  Turn on the front fog light.

9.  Loosen/tighten the adjusting screw and adjust the front fog light beam to the position shown in the figure.

atraaw00002178