FRONT FOG LIGHT BULB REMOVAL/INSTALLATION

id091800802300

Warning

•  The halogen fog light bulb has high pressure gas. If the glass surface is damaged or the bulb is dropped, it could break into pieces. Be very careful when servicing the bulb. Always hold the base part and avoid touching the glass. Failure to follow this procedure could result in injury.

Caution

•  Do not remove fog light bulb from the fog light until you install a new fog light. Fog light function may be negatively affected if the bulb is removed for a long period. Foreign materials will enter the fog light and could adhere to the lens or reflector. Do not turn the fog light on with the bulb removed.

1.  Disconnect the negative battery cable.

2.  Remove the fasteners and slightly bend back the mudguard.

3.  Remove in the order indicated in the table.

atraaw00002179

1	Connector
2	Screw
3	Cover
4	Front fog light bulb (See Front Fog Light Removal Note.)

4.  Install in the reverse order of removal.

Front Fog Light Removal Note

1.  Release the bulb seating wire to remove the front fog light bulb.