WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION

id091900800900

Caution

•  The internal permanent magnets used in the windshield wiper motor are made of a glass-like material. To avoid damaging the magnets, do not strike the motor with a hammer or any other object.

Note

•  The windshield wiper motor is not a repairable item. If worn or damaged, a new motor must be installed.

1.  Disconnect the negative battery cable.

2.  Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)

3.  Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION.)

4.  Disconnect the connector.

5.  Remove the windshield wiper motor as a single unit.

(1)  Disconnect the connector.

(2)  Remove the push-pin type retainer.

(3)  Remove the bolt.

(4)  Remove the windshield wiper motor as a single unit.

atraaw00001616

6.  Remove the windshield wiper motor.

atraaw00003443

7.  Install in the reverse order of removal.