ANTI-THEFT SYSTEM (AUDIO UNIT)
id092000803300
Alarm Conditions
• If the anti-theft system protection has been activated, any one of the following conditions will trigger the system:
-
― Disconnected battery cable
― Discharged battery
― Disconnected audio unit connectors
• If the system is triggered, the audio unit will then be inoperative when it is reconnected to a power source, and “code” will flash on the display until the preselected code number is input. If the anti-theft system is triggered, follow the procedures in “Canceling Anti-theft Operation” to reset the unit.
Canceling Anti-theft Operation
Properly input the selected code number to deactivate the anti-theft system and resume normal audio operation.
1. Turn the ignition switch to ACC position. (“CODE” will flash on the display.)
2. Press the POWER/VOLUME button.
3. Use channel buttons 1–4 to input the selected code number. Press button 1 for the first digit, 2 for the second, 3 for the third, and 4 for the last digit. If the display is deleted, repeat the procedure from step 1.
-
Caution
-
• The unit will lock for 30 min. if an incorrect password is entered four times consecutively.
4. Press preset button 5 to confirm that the password has been entered and to access the initial operation screen.
