PID/DATA MONITOR AND RECORD PROCEDURE[L3]

id0922008006a6

1. Connect the M-MDS or equivalent to the DLC-2 (16-pin).

atraaw00001950

2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

When using the IDS (notebook PC)

• Select the “Toolbox” tab.

• Select “DataLogger”.

• Select “Module”.

• Select “IC”.

When using the PDS (pocket PC)

• Select “Module Tests”.

• Select “IC”.

• Select “DataLogger”.

Display Table

PID name

Input/output signal/Part name

Unit/Status

Terminal

ABS_MSG

ABS HU/CM circuit status

Present/Not Present

3C, 3E

CCNT_HE

Number of DTC

—

—

ECT_GAUGE

Engine coolant temperature gauge

°F

°C

3C, 3E

ODO COUNT

Odometer

m

mi (ft)

PCM_MSG

PCM circuit status

Present/Not Present

TACH

Tachometer

RPM

SPDOMETER

Speedometer

MPH

KPH

PID name	Input/output signal/Part name	Unit/Status		Terminal
ABS_MSG	ABS HU/CM circuit status	Present/Not Present		3C, 3E
CCNT_HE	Number of DTC	—		—
ECT_GAUGE	Engine coolant temperature gauge	°F	°C	3C, 3E
ODO COUNT	Odometer	m	mi (ft)
PCM_MSG	PCM circuit status	Present/Not Present
TACH	Tachometer	RPM
SPDOMETER	Speedometer	MPH	KPH