TORQUE CONVERTER FLUSHING

Caution

• Mineral spirits used to clean the torque converter must be fresh, non-chlorinated and non-halogenated. Do not use water-based solvents or damage to the transaxle or torque converter can occur. Use clean automatic transaxle fluid as recommended for this transaxle.

1. Partially fill the torque converter using ATF.

2. Hand agitate the converter, then thoroughly drain the fluid.

3. Repeat this procedure until the converter is clean.

4. After flushing, drain the remainder of the solvent.

5. Fill the torque converter with the genuine ATF.