CONVENTIONAL BRAKE SYSTEM OUTLINE

BUE041100000N01

Warning

• Blistering or swelling of rubber parts may indicate contamination of the brake fluid by a petroleum-based substance. New rubber parts must be installed in the system if contaminated and the entire hydraulic brake system must be flushed with clean brake fluid to prevent recontamination.

• The conventional brake system consists of the following parts:

- Master cylinder

- Front brake calipers

- Rear wheel cylinders

- Brake pipes/hoses

• The brake system consists of two circuits, one between LF and RR, and the other between RF and LR, set in an X pattern.