No.2 THE SET SPEED FLUCTUATES

id0103c8806100

STEP

INSPECTION

ACTION

1
CHECK THE ACTUATOR CABLE/THROTTLE BODY LINKAGE
Turn the ignition switch off.
Remove the actuator cable from the cruise actuator. Visually inspect the core wire and check the actuator cable by pulling on it and noting the throttle movement.
Is the actuator cable and throttle body linkage okay?
Yes
Go to the next step.
No
Install a new actuator cable or repair the throttle body linkage.
Inspect the system for normal operation.
2
CHECK THE SPEEDOMETER OPERATION
Drive the vehicle and observe the speedometer operation.
Does the speedometer needle fluctuate?
Yes
Refer to Section 09-22.
No
Install a new cruise actuator.
Inspect the system for normal operation.