No.6 FLASH WITH LAST SWITCH PRESSED, BUT NO DYNAMIC PULL OCCURS AT THROTTLE AND THE CRUISE CONTROL IS INOPERATIVE
id0103c8806500
STEP
INSPECTION
ACTION
1
CHECK THE ACTUATOR CABLE
Check the actuator cable for correct attachment at the cruise actuator and throttle body.
Is the actuator cable attached correctly?
Yes
Go to the next step.
No
Reconnect the actuator cable.
Perform the self-test.
2
CHECK FOR A STICKING OR BINDING ACTUATOR CABLE
Check the actuator cable for sticking or binding.
Is the actuator cable okay?
Yes
Install a new cruise actuator.
Inspect the system for normal operation.
No
Repair or replace the actuator cable.
Perform the self-test.