1. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT [AJ (3.0L Duratec)].)
2. Remove the radiator cowling and cooling fan. (See COOLING FAN REMOVAL/INSTALLATION [AJ (3.0L Duratec)].)
3. Disconnect the lower radiator hose, oil hose (lower side), and coolant reserve tank hose (lower side).
4. Disconnect the oil hose (upper side).
5. Disconnect the upper radiator hose and coolant reserve tank hose (upper side).
6. Remove the radiator.
7. Install in the reverse order of removal.
