GENERAL PROCEDURES (CLUTCH)

Note

• A common reservoir tank is used for the clutch and brake system fluid.

Caution

• If clutch pipes have been disconnected any time during the procedure, add clutch fluid (brake fluid), bleed the air, and inspect for leakage after the procedure has been completed.

1. If removing the clutch pipe, remove it using the SST (49 0259 770B). If installing the clutch pipe, adjust the clutch pipe tightening torque to allow for the use of a torque wrench-SST (49 0259 770B) combination, and then tighten the clutch pipe using the SST (49 0259 770B). (R.H.D.)