SHIFT MECHANISM REMOVAL/INSTALLATION [G25MX-R]

id0516008000a5

1. Remove the center console trim.

2. Remove the shift lever boot.

3. Remove in the order indicated in the table.

4. Install in the reverse order of removal.

5. After installation, verify that the shift lever can be shifted smoothly into each position.

1
Clip
2
Clip
3
Clip
4
Bolts
5
Select cable
6
Shift cable
7
Bolts
8
Shift lever knob
9
Shift mechanism component

Shift and Select Cable Installation Note

1. Avoid holding cable end A and do not bend it excessively.

Note
• Do not bend the cable more than ± 10° to prevent permanent damage to cable components.

2. Insert the clip completely so that it is flush with the bracket end face.