AIR BAG SYSTEM

id080300800100

Foreword

• Refer to section 00. Thoroughly read and understand the basic flow of troubleshooting in order to properly perform the procedures.

Troubleshooting Index

• Use the chart below verify the symptoms of the trouble in order to diagnose the appropriate area.


No.	Malfunction symptom
1	Air bag system warning light does not illuminate when ignition switch is turned to ON position.
2	Air bag system warning light illuminates immediately after ignition switch is turned to ON position and remains illuminated.

Symptom Troubleshooting

Note

• The following may be the cause of trouble if the symptom does not go away after the symptom troubleshooting steps are followed.

- Simultaneous poor contact at terminal 2Q of SAS control module connector.

- Simultaneous poor contact at terminal 2V of SAS control module connector.

- Poor contacts in wiring harness between terminal 2Q of SAS control module connector and ground, and between terminal 2Q and ground at the same time.

- Poor contacts or short circuits in wiring harness between METER 10 A fuse and SAS control module, and between ENGINE 10 A fuse and SAS control module at the same time.