No.5 ONE HIGH BEAM HEADLIGHT IS INOPERATIVE
id0902h0811800
Possible Cause
• Headlight bulb malfunction
• Related wiring harness malfunction
Diagnostic Procedures
STEP
INSPECTION
ACTION
1
INSPECT INOPERATIVE HEADLIGHT POWER SUPPLY
Disconnect the inoperative headlight connector.
Turn the light switch to the ON position.
Measure the voltage at the inoperative headlight terminal C.
Is the voltage more than
10 V
?
Yes
Go to the next step.
No
Repair the related wiring harness.
2
INSPECT HEADLIGHT GROUND
Set the light switch at the high beam position.
Measure the resistance between the inoperative headlight terminal F and ground.
Is the resistance less than
5 ohms
?
Yes
Replace the headlight bulb.
No
Repair the related wiring harness.