No.20 O/D OFF INDICATOR LIGHT DOES NOT OPERATE

id0902j7822500

STEP

INSPECTION

ACTION

1
INSPECT O/D OFF FUNCTION OPERATION
Inspect the O/D OFF function operation.
Does the O/D OFF function operate normally?
Yes
Go to the next step.
No
Refer to Section 05.
2
INSTRUMENT CLUSTER SIMULATION USING WDS OR EQUIVALENT
Turn the ignition switch off.
Connect the WDS or equivalent to the DLC-2.
Turn the ignition switch to the ON position.
Select the ALL LAMP in the simulation items.
Inspect the O/D OFF indicator light.
Does the O/D OFF indicator light illuminate?
Yes
Refer to Section 05.
No
Go to the next step.
3
INSPECT INSTRUMENT CLUSTER OPERATION
Disconnect all the instrument cluster connectors.
Inspection:
• Corrosion
• Terminal separation
Connect the instrument cluster connector and verify that its position is correct.
Operate the system and inspect for any malfunction.
Is any malfunction still present?
Yes
Replace the instrument cluster. Inspect the system for normal operation.
No
The system operates normally. The malfunction may result from loose connectors or corrosion. Clear the DTC. Repeat the self-test.