No.2 ONE OR MORE TNS/LICENSE PLATE LIGHTS DO NOT TURN ON
id0903g2816200
POSSIBLE CAUSE
• Malfunction in the related wiring harness
• Malfunction in the light socket
Diagnostic Procedure
STEP
INSPECTION
ACTION
1
INSPECT INOPERATIVE LIGHT VOLTAGE
Turn the ignition switch to the LOCK position.
Disconnect the malfunctioning TNS connector.
Turn on the TNS.
Measure the voltage at the inoperative light.
Is the voltage more than
10 V
?
Yes
Go to the next step.
No
Repair the related wiring harness.
2
INSPECT MALFUNCTIONING TNS GROUND
Disconnect the malfunctioning TNS connector.
Measure the resistance between the inoperative light and ground.
Is the resistance less than
5 ohms
?
Yes
Replace the light socket.
No
Repair the related wiring harness.