Liftgate window Latch

LIFTGATE WINDOW LATCH

Removal and Installation

NOTE: Make sure the liftgate window glass is in the raised position.

1. Remove the liftgate trim panel.







2. Disconnect the liftgate window latch.
1 Disconnect the liftgate window latch ajar switch electrical connector.
2 Open the clip and disconnect the actuating rod.







3. NOTE: Mark the position of the liftgate window latch prior to removing the liftgate window latch bolts.

Remove the 2 liftgate window latch bolts and the liftgate window latch.
- To install, tighten to 7 Nm (62 lb-in).

4. NOTE: The liftgate window latch must be checked to make sure the latch is installed and aligned correctly.

To install, reverse the removal procedure.