Montero Only Vacuum Hose Installation

MONTERO ONLY

VACUUM HOSE INSTALLATION

2. Cut the vacuum hose in two near the EGR valve as shown in step 1 of Figure 37.

3. Install the vacuum hose assembly between the Thermo-Valve and the EGR valve.





4. As shown in Step 2 of Figure 36, cut the vacuum hose about 1" from the carburetor secondary throttle control diaphragm and install the new vacuum hose assembly between the cut hoses.

5. Step 3, retain in place using the supplied cable bands.

NOTE THE DIRECTION OF THE VACUUM DELAY VALVES. Each valve is marked with a band on one end to indicate direction.

6. Re-install the air cleaner assembly.