Removal and Installation

Part 1 Of 2:

Part 2 Of 2:

REMOVAL AND INSTALLATION

REMOVAL SERVICE POINT
<> RETAINER REMOVAL

Use a flat-tipped screwdriver or a similar tool to open up the retainer joint. Then remove the retainer.

INSTALLATION SERVICE POINTS
>>A<< WAVE WASHER INSTALLATION

Install the wave washer in the direction shown in the illustration.

>>B<< RETAINER INSTALLATION

Use pliers or a similar tool to close the retainer end onto the pin.

>>C<< SHOE AND LEVER ASSEMBLY/ADJUSTER LEVER/ SHOE AND LINING ASSEMBLY/SHOE-TO-LEVER SPRING/ AUTO ADJUSTER ASSEMBLY INSTALLATION

1. Assemble the shoe and lever assembly, the adjuster lever, the shoe and lining assembly, the shoe-to-lever spring, the automatic adjuster assembly temporarily.

2. Depress the wheel cylinder piston by hand.





3. Install the assembly to the backing plate carefully.

INSPECTION
BRAKE LINING THICKNESS CHECK
BRAKE DRUM INSIDE DIAMETER CHECK
BRAKE LINING AND BRAKE DRUM CONTACT CHECK