How to Connect SWS Monitor
HOW TO CONNECT SWS MONITORRequired Special Tools:
- MB991958: Scan Tool (MUT-III Sub Assembly)
- MB991824: Vehicle communication interface (V.C.I.)
- MB991827: MUT-III USB Cable
- MB991910: MUT-III Main Harness A
- MB991813: SWS monitor kit
- MB991806: SWS monitor cartridge
- MB991812: SWS monitor harness (for column-ECU)
- MB991822: Probe harness
- MB991854: SWS Monitor Harness (For 13-pin)
CAUTION: To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool MB991958. Connect the DLC harness before connecting the column-ECU harness. Be sure to connect SWS monitor kit MB991813 after turning on the scan tool MB991958.
SWS communication line connecting method
- Connect the SWS monitor harness (for 13-pin) to the data link connector (13-pin).
SWS communication line connecting method
1. Remove the steering column cover.
2. Remove the steering column switch connector.
3. Connect the SWS monitor harness (for column-ECU).