Removal and Installation

REMOVAL AND INSTALLATION

CAUTION: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the ground in an unladen condition.

REMOVAL SERVICE POINTS
[[A]] CONTROL LINK REMOVAL





After making a mating mark on the toe-in adjusting bolt, remove the control link.

[[B]] LOWER ARM AND TRAILING ARM DISCONNECTION





After supporting the lower arm with a jack, separate the lower arm and the trailing arm.

INSTALLATION SERVICE POINTS
]]A[[ UPPER ARM INSTALLATION





Install the upper arm so that its impression "A" faces inside of the vehicle.

]]B[[ CONTROL LINK INSTALLATION





Install the control link so that its identification mark faces front-outside of the vehicle.