Removal and Replacement

HEATER UNIT, HEATER CORE, BLOWER ASSEMBLY AND EVAPORATOR UNIT

HEATER UNIT AND FRONT DECK CROSSMEMBER ASSEMBLY REMOVAL AND INSTALLATION

Pre-Removal And Post-Installation Operation:

Removal Steps 1-7:

REMOVAL SERVICE POINTS

>>A<< CONNECTOR DISCONNECTION




Disconnect the following connectors to remove the front deck crossmember.

<> SUCTION FLEXIBLE HOSE AND LIQUID PIPE B DISCONNECTION

CAUTION: Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.

Plug the removed nipple of the pipe, hose and expansion valve to prevent the entry of dust and dirt.