Supplemental Restraint System (SRS) - Air Bag
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) - AIR BAG
WARNING:
- Improper service or maintenance of any component of the SRS and any SRS-related component, can lead to personal injury or death to service personnel (from inadvertent firing of the air bag) or to the driver and passenger (from rendering the SRS inoperative).
- The SRS components and seat belt with pre-tensioner should not be subjected to heat, so remove the SRS-ECU, driver's and front passenger's air bag modules, clock spring, side-airbag modules, Curtain air bag modules, front and side impact sensor and seat belt pre-tensioner before drying or baking the vehicle after painting.
- SRS-ECU, air bag modules, clock spring, impact sensor: 93° C (200° F) or more Seat belt with pre-tensioner 90° C (194° F) or more Service or maintenance of any SRS component and SRS-related component must be performed only at an authorized MITSUBISHI dealer.
- MITSUBISHI dealer personnel must thoroughly review workshop manual, and especially its SRS - Supplemental Restraint System (SRS), before beginning any service or maintenance of any component of the SRS and any SRS-related component.