Headlamp Bulb: Service and Repair

REPLACE THE BULB

HEADLIGHT BULB (LOW-BEAM) REPLACEMENT [VEHICLES WITHOUT DISCHARGE HEADLIGHT]

CAUTION:
Do not touch the bulb surface with bare hands or dirty gloves.
If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.





1. Twist the socket cover to remove.
2. Disconnect the connector, and twist the headlight bulb (low-beam) to remove.

HEADLIGHT BULB (HIGH-BEAM) REPLACEMENT

CAUTION:
Do not touch the bulb surface with bare hands or dirty gloves.
If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.





1. Twist the socket cover to remove.
2. Disconnect the connector, and twist the headlight bulb (high-beam) to remove.

POSITION LIGHT BULB REPLACEMENT





Disconnect the connector, and twist the position light socket to remove it.

FRONT TURN-SIGNAL LIGHT BULB REPLACEMENT

1. Remove the headlight support upper panel. Removal and Replacement.)





2. Disconnect the connector, and twist the front turn-signal light socket to remove it.