Fog/Driving Lamp: Service and Repair

Removal and Installation

REMOVAL
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.
1. Remove front portion of fender protector.
2. Disconnect fog lamp connector.




3. Remove fog lamp screws and pull fog lamp rearward out of front bumper.

CAUTION:
- Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc. entering the fog lamp body may affect the performance. Remove the bulb from the fog lamp assembly just before replacement bulb is installed.
- Grasp only the plastic base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect the bulb life and/or fog lamp performance.

INSTALLATION
Installation is in the reverse order of removal.