Shifter A/T: Service and Repair
SHIFT CONTROL SYSTEMControl Device Removal and Installation
Floor Shift Models
Exploded View AT-231:
Column Shift Models
Exploded View AT-232:
REMOVAL
Floor shift
1. Remove negative battery terminal.
2. Remove A/T finisher.
3. Disconnect A/T device harness connector.
4. Disconnect selector control cable.
5. Remove control device assembly.
Column shift
1. Remove the column shift control.
2. Remove the A/T cable clip lock plate and remove the cable from column shifter pin.
INSTALLATION
Installation is in reverse order of removal.
^ After installation is completed, be sure to check A/T position.
Adjust if necessary.