Starting System: Service and Repair

STARTING SYSTEM

Exploded View SC22:

Removal and Installation

REMOVAL
1. Disconnect the negative battery terminal.
2. Remove engine undercover, using power tools.
3. Remove exhaust manifold cover from exhaust manifold (bank 1) to gain access to starter cover bolts.
4. Remove starter cover bolts and starter cover.




5. Disconnect terminal "1" connector and terminal "2" nut.
6. Remove the two starter bolts, using power tools.
7. Remove the starter.

INSTALLATION
Installation is in the reverse order of removal.

Terminal "2" nut : 10.8 N.m (1.1 kg-m, 8 ft-lb)

CAUTION: Be sure to tighten terminal "2" nut carefully.