Seals and Gaskets: Service and Repair
Differential Side Oil SealAT-223 Components:
REMOVAL AND INSTALLATION
Removal
1. Remove front drive shaft.
2. Remove differential side oil seals using a flat-bladed screwdriver.
CAUTION: Be careful not to scratch transaxle case and converter housing.
Installation
Installation is in the reverse order of removal.
NOTE:
^ Drive each differential side oil seal evenly using a drift (SST and commercial service tool) so that differential side oil seal protrudes by the dimension "C" or "D" respectively.
(1): LH differential side oil seal
(2): RH differential side oil seal
(A): Transaxle case side
(B): Converter housing side
^ Differential side oil seal pulling direction is used as the reference.
^ After installing differential side oil seal, check A/T fluid leakage and A/T fluid level. Refer to MA-22, "Checking A/T Fluid".