Carpet Trim Plate Replacement - Rear Floor

Carpet Trim Plate Replacement - Rear Floor

Removal Procedure

1. Remove the rear seats. Refer to the following procedures in Seats:

* Seat Replacement - Rear Bucket (Seat Replacement - Rear Bucket)
* Seat Replacement - Rear 50-50 Split (Seat Replacement - Rear 50-50 Split)





2. Release the T-pin retainer in the anchor plate bezel using a small flat-bladed tool.




3. Remove the anchor plate bezel from the floor.



Installation Procedure





1. Position the anchor plate bezel to the floor.




2. Install the T-pin on the anchor plate using a small flat-bladed tool, pressing into place until fully seated.
3. Install the rear seats. Refer to the following procedures in Seats:

* Seat Replacement - Rear Bucket (Seat Replacement - Rear Bucket)
* Seat Replacement - Rear 50-50 Split (Seat Replacement - Rear 50-50 Split)