Trim Panel Replacement - Rear Quarter Upper

Trim Panel Replacement - Rear Quarter Upper (Aztek)

Removal Procedure

1. Remove the rear roof garnish molding. Refer to Garnish Molding Replacement - Rear Upper (Garnish Molding Replacement - Rear Upper) .
2. Remove the rear seat belt guide loop from the rear upper quarter trim panel. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.




3. Remove the screw from the rear upper quarter trim panel.




4. Remove the push pins from the upper quarter trim.




5. Remove the trim panel from the inner panel, by pulling the panel to release the push-in retainers.
6. Remove the trim panel from the vehicle.



Installation Procedure





1. Align the push-in retainers on the upper trim panel to the inner panel.
2. Install the push-in retainers, applying pressure to secure the panel at all of the retainer locations.




3. Install the push pins to the upper quarter trim.
4. Install the rear seat belt guide loop to the rear upper quarter trim panel. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.




5. Install the upper quarter screw.
6. Install the rear roof garnish molding. Refer to Garnish Molding Replacement - Rear Upper (Garnish Molding Replacement - Rear Upper) .