Seat Cushion Cover Replacement - Front

SEAT CUSHION COVER REPLACEMENT - FRONT (AZTEK)

REMOVAL PROCEDURE
1. Remove the front bucket seat from the vehicle.
2. Remove the front seat back.
3. Remove the front seat adjuster.
4. Disconnect the electrical connector for the heated seat, if equipped.




5. Remove the J-hook retainers on the front of the front seat cushion cover.




6. Remove the J-hook retainers on the sides of the front seat cushion cover.




7. Remove the J-hook retainers on the rear of the front seat cushion cover.




8. Remove the hook and the loop retainers securing the seat cushion cover to the cushion.




9. Remove the hog rings from the front seat cushion cover.
10. Remove the front seat cushion cover from the front seat cushion.

INSTALLATION PROCEDURE




1. Install the seat cushion cover onto the front seat cushion.
2. Install the hog rings from the front seat cushion cover.




3. Install the J-hook retainer on the front of the front seat cushion cover.




4. Install the J-hook retainers on the sides of the front seat cushion cover.




5. Install the J-hook retainer on the rear of the front seat cushion cover.




6. Install the hook and the loop retainers securing the seat cushion cover to the cushion, by pressing in place until fully seated.
7. Install the front seat adjuster.
8. Connect the electrical connector for the heated seat, if equipped.
9. Install the front seat back.
10. Install the front bucket seat to the vehicle.