Seat Cushion Inner Panel Replacement - Rear

SEAT CUSHION INNER PANEL REPLACEMENT - REAR

REMOVAL PROCEDURE
1. Remove the rear bucket seat from the vehicle.




2. Remove the rear screw from the rear seat cushion trim cover.




3. Remove the front screw from the rear seat cushion trim cover.
4. Remove the rear seat belt buckle.




5. Remove the rear seat cushion trim cover from the rear seat .

INSTALLATION PROCEDURE
1. Position the rear seat cushion trim cover to the rear seat.




2. Install the upper retainer clip to the seat frame, pressing into place until fully seated.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Install the rear screw to the seat cushion trim cover.

Tighten
Tighten the rear seat cushion trim cover screw to 40 N.m (30 lb ft).




4. Install the front screw from the rear seat cushion trim cover.

Tighten
Tighten the rear seat cushion trim cover screw to 40 N.m (30 lb ft).

5. Install the rear seat belt buckle.
6. Install the rear bucket seat to the vehicle.