Energy Absorber Replacement - Rear (Aztek)

Energy Absorber Replacement - Rear (Aztek)

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover


Removal Procedure





1. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Aztek) (Fascia Replacement - Rear Bumper (Aztek))Fascia Replacement - Rear Bumper (Rendezvous) (Fascia Replacement - Rear Bumper (Rendezvous)) .
2. Using J 38778 , remove the push-in retainers from the rear bumper energy absorber.




3. Remove the rear bumper energy absorber from the rear bumper impact bar.



Installation Procedure





1. Install the rear bumper energy absorber to the rear bumper impact bar.




2. Install the push-in retainers to the rear bumper energy absorber.
3. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Aztek) (Fascia Replacement - Rear Bumper (Aztek))Fascia Replacement - Rear Bumper (Rendezvous) (Fascia Replacement - Rear Bumper (Rendezvous)) .