Digital Radio Receiver Setup

DIGITAL RADIO RECEIVER SETUP

IMPORTANT: The Digital Radio Receiver Setup option does not contain a submenu. Digital Radio Receiver Setup will configure the following systems:
- DTCs
- GMLAN radio messages

To properly setup the digital radio receiver (DRR), complete the following procedure using a scan tool:
1. At the Main Menu screen, select DIAGNOSTICS.
2. At the Vehicle Identification screen, select the following:
1. Model Year
2. Vehicle Type
3. At the Vehicle Identification screen, select PRODUCT LINE.
4. At the System Selection Menu screen, select Vehicle Control Systems.
5. At the service categories screen, select Computer/Integrating Systems.
6. Select Module Replacement/Setup.
7. Select Digital Radio Receiver.
8. Select DRR Setup.
9. After the scan tool displays, TEST COMPLETED SUCCESSFULLY, press EXIT.
10. Cycle the ignition.

XM Activation
1. Turn the radio on, tune to the XM channel 0, and record the Radio ID.The Radio ID will be needed for activation of the new receiver.

IMPORTANT:
- After replacement of an XM Radio receiver, call XM Radio to deactivate the receiver that has been removed from the vehicle and activate the new XM Radio receiver.
- The vehicle must be parked in view of a satellite within 24 hours after an activation call.

2. Call XM Radio at 1-800-556-3600 to deactivate the faulty receiver and activate the new receiver.
3. Park the vehicle outside in an area with an unobstructed view of the southern sky.
4. Leave the vehicle outside with the ignition switch in the ACC (accessory) position and the radio on for 30 minutes to activate XM service.
5. Once activated the radio will receive the remaining XM Radio channels.