Rear Fender Liner: Service and Repair

Removing And Installing Rear Wheel Housing Liner

Technical values







Preliminary work

Remove wheel. Refer to Removing and installing wheel.

Removing rear wheel housing liner







INFORMATION: Fastening nuts cannot be used again following removal.

1. Unscrew fastening screws -1- and fastening nuts -2-.







2. Remove wheel housing liner -A-.

Installing rear wheel housing liner







1. Insert wheel housing liner -A-.







2. Screw in fastening screws -1- and tighten them to the specified tightening torque: Final tightening: 2 Nm (1.5 ftlb.).
3. Screw on fastening nuts -2- and tighten them to the specified tightening torque: Final tightening: 1.5 Nm (1.0 ftlb.).


Subsequent work

Reworking

Install wheel. Refer to Removing and installing wheel