Weatherstrip Replacement - Drip Rail

Weatherstrip Replacement - Drip Rail

Removal Procedure




1. Open the doors.
2. Release the weatherstrip push-in retainers from the rear lock pillar.
3. Pull the roof drip weatherstrip from the pinch-weld flange.

Installation Procedure




1. Position the weatherstrip to the pinch-weld flange starting at the rear retainer holes.
2. Install the weatherstrip push-in retainers pressing into place until fully seated.
3. Install the weatherstrip push-in retainers pressing into place until fully seated.
4. Close the doors and inspect the weatherstrip for proper fit.