Operation CHARM: Car repair manuals for everyone.

Courtesy Lamp: Description and Operation



COURTESY/ILLUMINATED ENTRY LAMPS

This group includes lamps that may be manually turned ON by placing the interior lamp switch in the ON position, or by opening a door.
- The Roof Rail/Reading Lamps
- The Dome Lamp
- The Rear View Mirror Lamps

The dome lamp switch has 3 positions, DOOR, OFF and ON. When in the DOOR position, the dome lamp operation is controlled by the body control module (BCM). The ON position provides a ground for continuous operation. Ground is provided at G104. The OFF position turns OFF any dome lamp operation. The courtesy lamps, may be manually turned ON by placing the instrument panel (I/P) dimmer switch in the DOME position. When the dome lamp switch is in the DOOR position, the dome lamp will illuminate when a door is opened. When a door is opened, the courtesy lamps turn ON. After all the doors have been closed the courtesy lamps will remain illuminated approximately 10 seconds after the last door closes. When the driver places the dome lamp switch in the OFF position, the dome lamp will be disabled.

The BCM 2 fuse in the underhood fuse block supplies battery positive voltage to the BCM. The courtesy lamp supply voltage circuit of the BCM supplies battery positive voltage to all of the interior courtesy lamps. When any door is opened, the door jam switch contacts close and the door open input to the BCM is grounded. Some of the courtesy lamps may also be used as reading lamps by placing the lamps switch in the ON or OFF position. The rear view mirror may contain 2 map lamps. Each map lamp may be manually turned ON or OFF using its own switch.

If the driver inadvertently leaves any interior lamp ON the BCM will turn it OFF after 20 minutes.

The courtesy lamps will normally turn OFF using the theater dimming feature. The BCM provides a pulse width modulated ground to left and right hand courtesy/reading lamps and the dome lamp for the theater dimming feature. The courtesy lamps will also turn OFF immediately if a door lock command is received with all the doors closed, or if the ignition switch is turned to the ON position.