10. Timing Belt Removal

Timing Belt Removal

^ Tools Required
- EN 46331 Timing Belt Tensioner Pulley Retaining Bolt





1. Important: The powertrain control module (PCM) has to perform the crankshaft position learn process under the following conditions:

^ The crankshaft position (CKP) sensor is removed for replacement or during disassembly
^ The timing belt is removed for replacement or during disassembly
^ The CKP Pattern Clear is executed from the scan tool
^ The PCM is replaced
Use the EN 46331 to retain the tensioner pulley. Tighten until snug.





2. Loosen the idler pulley bolt (238) about 5 or 6 turns.





3. Remove the belt (235).
4. Remove the EN 46331.