78. Timing Belt Tensioner Installation

Timing Belt Tensioner Installation

^ Tools Required
- EN 46330 Timing Belt Tensioner Retaining Pin





1. Notice: Do not exceed 9,800 N (2,200 lbs.) when compressing the rod of the tensioner or component damage may occur.

Using a hydraulic press, slowly compress the tensioner.
2. Insert the EN 46330 through the housing and rod.





3. Notice: Refer to Fastener Notice in Service Precautions.

Install the bushing (234), tensioner bracket (233) and bolt (250).
Tighten the bolt to 25 Nm (19 ft. lbs.).
4. Install the pulley (232) and nut (231).
Tighten the nut to 80 Nm (59 ft. lbs.).





5. Install the tensioner (252) and bolts (251).
Tighten the bolts to 12 Nm (106 inch lbs.).