Camshaft Drive Sprocket Replacement - Left

Camshaft Drive Sprocket Replacement - Left

^ Tools Required
- EN 46337 Timing Belt Alignment Kit

Removal Procedure
1. Remove the timing belt.





2. Use the EN 46337 to retain the camshaft sprocket.
3. Remove the camshaft bolt and sprocket.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Use the EN 46337 to retain the camshaft sprocket.
Tighten the camshaft sprocket bolt to 90 Nm (67 ft. lbs.).
2. Install and adjust the timing belt.