Stabilizer Shaft Insulator Replacement

Stabilizer Shaft Insulator Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.




2. Remove the stabilizer bar clamp to cradle bolts.
3. Remove the stabilizer bar clamps and bushings from the stabilizer bar.

Installation Procedure




1. Install the stabilizer bar clamps and bushings to the stabilizer bar.

Notice: Refer to Fastener Notice.

2. Install the stabilizer bar clamp to cradle bolts.

Tighten the bolts to 50 N.m (37 lb ft).

3. Lower the vehicle.