5AT - Automatic Transmission

Torque Converter Clutch Solenoid Replacement

Removal Procedure

1. Remove the battery tray.




2. Disconnect the wiring harness from the torque converter clutch (TCC) solenoid.
3. Remove the TCC solenoid bolts.
4. Remove the TCC solenoid assembly.

Installation Procedure




1. Install the TCC solenoid assembly to the transmission case assembly.

Notice: Refer to Fastener Notice.

2. Install the TCC solenoid bolts.

Tighten the TCC solenoid bolts 12 N.m (106 lb in).

3. Connect the wiring harness to the TCC solenoid.
4. Install the battery tray.