Front Crankshaft Seal: Service and Repair

Crankshaft Front Oil Seal Replacement

Tools Required

J 35268-A Camshaft/Front Main Seal Installer




1. Remove the crankshaft balancer pulley.
2. Using a seal removal tool or screwdriver, remove the oil seal from the front cover.

* Clean the seal bore and oil drain back passage way.
* Ensure that the oil drain back passage is free of RTV or debris.




3. Install a new oil seal using the J 35268-A

Important: Always ensure that the oil pump cover is properly supported when installing.

* Ensure that the font main oil seal is fully and evenly sealed.
* Apply a thin film of oil to seal the lip.

4. Install the crankshaft balancer pulley.