Ignition Coil(s) Replacement - Bank 1

Ignition Coil Replacement - Bank 1

Removal Procedure





1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement) .
2. Disconnect the engine wiring harness electrical connectors (1) from the ignition coils.




3. Remove the ignition coil bolts.
4. Remove the ignition coils.



Installation Procedure





1. Install the ignition coils.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the ignition coil bolts.

Tighten the bolts to 10 N.m (89 lb in).





3. Connect the engine wiring harness electrical connectors (1) to the ignition coils.
4. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement) .